how to replace a starter motor on a kymco ck 1 125 cc motorcycle at home

When it comes to caring for your motorcycle, replacing a starter motor is one of the more important repairs you can make. Without a starter motor, your ride won’t even turn over. Replacing a starter motor on a Kymco CK 1 125 cc motorcycle can be relatively straightforward and can be completed at home with basic tools and knowledge.

Your first step should be to locate the starter motor and disconnect the main power wire. This can usually be found near the battery and is used to provide power to the starter motor. Check the wiring to make sure there isn’t any corrosion or damage. If all looks good, unplug the power wire from the starter.

Now that the power is disconnected, you’re ready to remove the starter motor. Follow the bolts or screws that attach the starter motor to the engine block. Once all the bolts are removed, carefully slide the old starter motor off the engine block. Install the new starter by placing it in the exact same spot as the old one and re-attaching the bolts or screws that held the old starter in place. Reconnect the main power wire to the terminal on the starter motor and you’re almost done.

Once everything is connected, check to make sure the starter motor is turning and that the power cable is securely connected. Start your engine and make sure it’s running properly. With a few simple steps, you can save yourself time and money by replacing the starter motor on your Kymco CK 1 125 cc motorcycle right in your own garage.

Kymco Ck1 125 2014 On Review Sd Specs S Mcn