How To Check Ign Switch On 318 John Deere

Ignition switches are an important part of any piece of machinery, and checking them regularly is essential in ensuring their proper functioning. Whether you're dealing with a John Deere 318 or any other model, inspecting the switch should be done as part of your regular equipment maintenance. Knowing how to check an ignition switch on a John Deere 318 can help you keep your machine running smoothly and safely for years to come.

To check your ignition switch on a John Deere 318, you'll first want to disconnect the battery power source. This will prevent any electrical shock from occurring during your inspection. Next, locate the three-way connecter on the back of the key switch. This can be found by removing the rear cover on the machine's dash panel. With this connector removed, you can use an ohmmeter to check the resistance of each terminal against the others. Ideally, the readings should fall between 0.5 and 5 ohms. If they don’t, you may need to replace the switch.

Lastly, reattach the connector and reconfigure the wiring as necessary. Make sure the connections are tight and secure before testing the switch with the power source connected. If all appears to be in working order, you can start the engine and test the switch by turning off the engine and then on again. With these easy steps, you now know how to check an ignition switch on a John Deere 318 and keep your machine in good working order.

318 Pto Switch Weekend Freedom Machines